EU(Extension Unit)
Return
EU(Extension Unit)

EU(Extension Unit)

The main function of the extension unit is to send the data of the access unit to the remote unit and upload the data of the remote unit to the access unit.
Brochure
Inquiry
Topology &Networking
Specification



    


Extension unit front panel from left to right interface:

211: Optical distribution system extension unit DC 48V output interface

212: Dual wideband access interface for optical distribution system extension unit (RJ45)

213: Dual wideband access interface for optical distribution system extension unit;(Optic)

214: Cascading optical port (up and down) for extension unit of optical distribution system

215: Optic distribution system extension unit power supply indicator

216: The remote power supply interface between the extension unit of the optical distribution system and the remote unit 1-8

217: Debug port of optical distribution system extension unit

218: Optical distribution system extension unit remote monitoring MODEM SIM card socket (not in use)

219: Optical Distribution System Extension Unit Local Monitoring Interface (Ethernet)

21A: Working status indicator of light distribution system extension unit.

21B: Power switch of optical distribution system extension unit

21C: Optical distribution system extension unit to the optical port of the remote unit 1-8.

 


Extension unit rear panel interface description:

221: Power supply interface of optical distribution system expansion unit is 220VAC

222: Power supply interface of optical distribution system extension unit 48VDC

223: External alarm interface


SPECIFICATION
1
With the capability of cascading extension units, a single link can extend units up to 8 levels
2
With broadband access interface, 1000 BASE-T interface, data rate of 500Mbps
3
Support connecting to 8 remote units (8 optical ports +8 Eth ports)
4
The optical port and the network port adopt the adaptive design, the user can choose the interface form at will
5
Built-in POE/PSE devices enable remote units to transmit over Ethernet without local power access
6
External DC remote supply system can provide power for remote unit in the case of optical fiber transmission used without local power
7
DC remote transmission distance can reach more than 500M
8
With 10/100M local monitoring interface, through this interface can realize the extension unit module monitoring and remote unit monitoring
9
Power supply interface: AC 220V(full load power consumption 700W, excluding WLAN AP power consumption)
10
Operating temperature:-40℃— +55℃
11
Size:440mm×350mm×86mm
12
Weight:6.6KG
Contact
Inquiry
EU(Extension Unit)
EU(Extension Unit)
Inquiry